Associate
Professor Contact
Information Office:
Bldg
63-Room 303 Phone:
+966-13-860-2547 Fax:
+966-13-860-2949 (ME Dept) Email:
: ahsarhan@kfupm.edu.sa Website
: Personal Page Education Ph.D., Precision
Engineering, Kyoto University, Kyoto, Japan M.Sc., Mechanical
Engineering, Assiut University, Assiut, Egypt B.Sc., Mechanical
Engineering, Assiut University, Assiut, Egypt Courses
Taught Advanced
Surface Engineering, 2009-Present Advanced
Manufacturing Processes, 2009-Present Machine
Tool Engineering, 2007-Present Basic
manufacturing processes, 2009-Present Introduction
to Manufacturing Process, 2009-Present
Tool
Engineering, 2009-Present Surface
Engineering, 2009-Present Advanced
Manufacturing Processes, 2009-Present CNC
Technology and Programming 2007-2009 Research
Areas - Precision Machining and Computer Integrated
Manufacturing (CIM)
- Cutting Tool Technology
- Non-Conventional Machining
- Additive manufacturing, Surface Engineering and
Coatings
Patents
- Rotating
Bending Fretting Fatigue Machine (Patent Number: PI2011002242 - June 16-2011)
http://umfacts.um.edu.my/patent/index.php - Intelligent
Lubrication System in CNC Machine Linear guide ways for More Precise
Machining and Less Oil Consumption (Patent Number: PI 2012701005 - 26/11/2012). (Granted Number: MY-155471-A - 16/10/2015) (28/11/2012 - 28/11/2032)
http://www.google.com/patents/WO2014081281A2?cl=en
- Modified
wheelchair with transferring mechanism to assist the wheelchair-bound person
(Patent Number: PI 2012004799 – 16-11-2012)
http://umfacts.um.edu.my/patent/index.php - Newly nanolubrication system in CNC machining processes for better
product quality, more power savings, and less oil consumption and pollution
(Patent Number: PI2012701070 -5/12/2012). http://www.highbeam.com/doc/1P3-3334655121.html
http://www.sumobrain.com/patents/wipo/Nano-liquid-lubrication-composition-its/WO2014088409A2.pdf - Titanium
Nitride Coated Aerospace Al7075-T6 Alloy Substrate and Methods Thereof
(Patent Number: PI 2012005214 – 4/12/2012) - (Patent Number: PI 2016701774 –
17/5/2016)
http://umfacts.um.edu.my/patent/index.php - A new technique for hard
anodizing of Al7075-T6 alloy (Patent Number: PI2012005131 - 10/12/2012).
(Granted Number: MY-155475-A - 16/10/2015) (28/11/2012 - 28/11/2032)
http://umfacts.um.edu.my/patent/index.php - Gear backlash compensation
mechanism (GBCM) in rack and pinion
system (Patent Number: PI 2012701279 - 26/12/2012). http://umfacts.um.edu.my/patent/index.php
- An Improved Computer Numerically Controlled Gantry Device and Method
Thereof (Patent Number: PI 2013001205 – 5/4/2013). http://patentscope.wipo.int/search/en/WO2014163483
- A
Wheelchair For Negotiating Gab Obstacles (Patent Number: PI 2013701166 –
29/6/2013)
http://umfacts.um.edu.my/patent/index.php - A Wheelchair carrier Attachable
Baby Seat To Manual Wheelchair (Patent Number: PI 2013003610 - 4/10/2013). http://umfacts.um.edu.my/patent/index.php
- Molybdenum Disulfide (MoS2)
Nanolubrication system in CNC machining applications (PI 2013004641 –
24/12/2013). http://umfacts.um.edu.my/patent/index.php
- Horizontal heat exchanger for thermal energy storage technique (PI
2014700388 – 21/2/2014), Google Patents. (PCT/MY2015/050005 - Aug 27, 2015)
http://www.google.com/patents/WO2015126238A1?cl=en - Ultrasonic motor with new
Housing and Preload Mechanism (PI 2014702645-17 September 2014). http://umfacts.um.edu.my/patent/index.php
- A novel high-pressure fluid jet
in grinding process for less wheel loaded areas (PI 2014703299 - 6 November
2014). http://umfacts.um.edu.my/patent/index.php
- Thermal spray of Ceramic oxide
thin layer coating to enhance wear and corrosion resistance of carbon steel
for oil and gas application(PI 2014701851-11 July 2014)
http://umfacts.um.edu.my/patent/index.php - Compact and thin ultrasonic
motor with ability of producing high torque (PI 2014703157 - 24/10/2014). http://umfacts.um.edu.my/patent/index.php
- Ultrasonic screw pump (USP) for
liquid and powder movement (PI 2014703150-23/10/2014). http://umfacts.um.edu.my/patent/index.php
- Multiple Nozzle FDM 3D printer (PRINT-HEAD ASSEMBLY) for increasing
surface quality and product fabrication speed (PI 2015700874-19/03/2015)
- Food Decorating System Patent:
(PI 2015700957-March 2015)
- Method and Apparatus for
Fabricating High Aspect Ratio Micro-Electrode (PI 2016700365 -
1 February 2016)
- An Electrode Wire for Use in
Wire Electrical Discharge Machining (PI 2016700115 - 13 January 2016)
- An Electric Discharge Machining
Dielectric Fluid and An Electric Discharge Machining Apparatus (PI 2016700225
- 21 January 2016)
- Electrical Discharge Machining Electrode with Lower
Wear Rate (Under process)
Representative
Publications (Book Chapter)
1-
Ahmed A. D. Sarhan, Atsushi
Matsubara (2013) "High-Precision Machining by Measuring and Compensating
the Error Motion of Spindle's Axis of Rotation in Radial Direction",
"Electrical Engineering and Intelligent Systems (EEIS)": Springer
international publisher Pte Ltd., Lecture Notes in Electrical Engineering,
2013, Volume 130, 347-359, (ISI-Cited Publication), http://www.springerlink.com/content/p174772810863467/ 2-
M. Sayuti1, Ahmed A. D. Sarhan,
M. Hamdi, 2013 “Surface Quality Improvement in CNC End Milling Machined
Aerospace AL-2017-T4 Alloy using Carbon Onion Nanolubrication with DLC
Cutting Tool” IAENG Transactions on Engineering Technologies, Springer
international publisher Pte Ltd., Lecture Notes in Electrical Engineering,
Volume 229, 2013, pp 669-683, (ISI-Cited Publication), http://link.springer.com/chapter/10.1007/978-94-007-6190-2_51 3-
Erfan Zalnezhad, Ahmed A.D.
Sarhan, (2014) "Fuzzy Logic Modeling for Higher Adhesion Strength of
Cr/Cr-N Multilayer thin film Coating on aerospace Al7075-T6 Alloy for higher
Fretting Fatigue Life," Transactions on Engineering Technologies -
Springer international publisher Pte Ltd., Lecture Notes in Electrical
Engineering, 2014, pp 291-304, DOI : 10.1007/978-94-017-9115-1_22, (ISI-Cited
Publication). http://link.springer.com/chapter/10.1007/978-94-017-9115-1_22 4-
M. Sayuti1, Ahmed A. D. Sarhan,
(2015) "ANFIS Modeling for Higher Machining Performance of Aerospace
Aluminum Tempered Grade 6061 Using Novel SiO2 Nanolubrication", IAENG
Transactions on Engineering Technologies, Springer international publisher Pte
Ltd., Chapter 39, 2015, pp
551-565, DOI: 10.1007/978-94-017-7236-5_39, ISBN : 978-94-017-7235-8,
(ISI-Cited Publication). http://link.springer.com/chapter/10.1007/978-94-017-7236-5_39 5-
E Zalnezhad, Ahmed AD Sarhan,
2015/2/10, "Fuzzy modeling to predict the adhesion strength of TiN
ceramic thin film coating on aerospace AL7075-T6 alloy", Recent Advances
in Structural Integrity Analysis-Proceedings of the International Congress
(APCF/SIF-2014):(APCFS/SIF 2014), Woodhead Publishing-Elsevier, ISBN:
978-0-08-100203-2, Pages 239 6-
Ibrahem Maher, Ahmed A.D. Sarhana,
H. Marashi, “Effect of Electrical Discharge Energy on White Layer Thickness
of WEDM Process", Elsevier publisher, Reference Module in Materials
Science and Materials Engineering, Comprehensive Materials Finishing, 2017,
Pages 231–266, Volume 1 http://www.sciencedirect.com/science/article/pii/B9780128035818091542 http://www.sciencedirect.com/science/referenceworks/9780128032497 7-
Houriyeh Marashi, Ahmed A. D.
Sarhan, I. Maher, M. Sayuti, "Various Techniques to Improve EDM
Capabilities: A Review," Elsevier publisher, Reference Module in
Materials Science and Materials Engineering, Comprehensive Materials
Finishing, 2017, Pages 171–202, Volume 1 http://www.sciencedirect.com/science/article/pii/B9780128035818091530 http://www.sciencedirect.com/science/referenceworks/9780128032497 8-
Mehdi Hourmand, Ahmed A. D.
Sarhan, Saeed Farahany, M. Sayuti, " Introducing the Modified
Fabrication and Measurement Process of Micro-electrode for Micro-EDM of
Tungsten Carbide to Improve MRR, EWR and Hole Quality using EDM
machine," Elsevier publisher, Reference Module in Materials Science and
Materials Engineering, Comprehensive Materials Finishing, 2017, Pages
267–321, Volume 1 http://www.sciencedirect.com/science/article/pii/B9780128035818091554 http://www.sciencedirect.com/science/referenceworks/9780128032497 9-
Mitra Akhtari Zavareh, Ahmed A.
D. Sarhan, (2016) “Introducing New Coating Material Alloy with Potential
Elements for High Corrosion Resistance for Oil and Gas Application”, Advances
in Tribology book, edited by Prof. P. H. Darji (Ed.), InTech, ISBN
978-953-51-2743-7, Print ISBN 978-953-51-2742-0, Published: October 26, 2016
under CC BY 3.0 license. http://www.intechopen.com/books/advances-in-tribology
Representative
Publications (ISI Journals) 10- E. Zalnezhad, Ahmed
A. D. Sarhan, M. Hamdi, "Optimizing the PVD TiN Thin Film Coating's
parameters on Aerospace AL7075-T6 Alloy for Higher Coating Hardness and
Adhesion with Better Tribological Properties of the Coating Surface",
International Journal of Advanced Manufacturing Technology, January 2013, V(64),
Issue 1-4, pp 281-290. http://www.springerlink.com/content/uj225425221833p4/
11- M. Sayuti, Ahmed A. D. Sarhan, M. Hamdi,
“An investigation of optimum SiO2 nanolubrication parameters in
end milling of aerospace Al6061-T6 alloy”, International Journal of Advanced
Manufacturing Technology, July 2013, V(67), Issue 1-4, pp 833-849. http://dx.doi.org/10.1007/s00170-012-4527-z
12- E. Zalnezhad, Ahmed
A. D. Sarhan, M. Hamdi, “A Fuzzy Logic based Model to Predict surface
hardness of thin film TiN Coating on Aerospace AL70751”, International
Journal of Advanced Manufacturing Technology, September 2013, V (68), Issue
1-4, pp 415-423.
http://dx.doi.org/10.1007/s00170-013-4738-y 13- E. Zalnezhad, Ahmed
A. D. Sarhan, M. Hamdi, "Investigate the Effects of Hard Anodizing Parameters
on Surface Hardness of Hard Anodized Aerospace AL7075-T6 Alloy Using Fuzzy
logic approach for Fretting Fatigue Application", International Journal
of Advanced Manufacturing Technology, September 2013, V(68), Issue 1-4, pp
453-464.
http://dx.doi.org/10.1007/s00170-013-4743-1
14- M. Sayuti, Ahmed
A. D. Sarhan, Tomohisa Tanaka, M. Hamdi, Yoshio Saito, "Cutting
force reduction and surface quality improvement in machining of aerospace
duralumin AL-2017-T4 using carbon onion nanolubrication system," The
International Journal of Advanced Manufacturing Technology, April 2013, V(65),
Issue 9-12, pp 1493-1500, (2012).
http://www.springerlink.com/content/a36735143468w772/
15- Ahmed A. D. Sarhan, E. Zalnezhad, M.
Hamdi, “The influence of Higher Surface Hardness on Fretting Fatigue Life of
Hard Anodized aerospace AL7075-T6 Alloy,” International Journal of Materials
Science & Engineering A, 10 January 2013, V(560), PP 377-387.
http://dx.doi.org/10.1016/j.msea.2012.09.082
16- E. Zalnezhad, Ahmed
A. D. Sarhan, M. Hamdi, “Investigating the fretting fatigue life of thin
film titanium nitride coated aerospace Al7075-T6 alloy,” Materials Science
& Engineering A, 1 January 2013, V(559), PP 436-446.
http://dx.doi.org/10.1016/j.msea.2012.08.123 17- H. Adibi, S.M.
Rezaei, Ahmed A. D. Sarhan "Analytical Modeling of Grinding Wheel
Loading Phenomena" International Journal of Advanced Manufacturing
Technology, September 2013, V(68), Issue 1-4, pp 473-485.
http://dx.doi.org/10.1007/s00170-013-4745-z
18- Ahmed A. D. Sarhan, M.Sayuti, M. Hamdi,
"Reduction of power and lubricant oil consumption in milling process
using a new SiO2 nanolubrication system" International Journal of
Advanced Manufacturing Technology, November 2012, V(63), Issue 5-8, pp
505-512. http://www.springerlink.com/content/a3357l71563g2683/
19- E. Zalnezhad, Ahmed
A. D. Sarhan, M. Hamdi, “Prediction of TiN Coating Adhesion Strength on
Aerospace AL7075-T6 Alloy Using Fuzzy Rule Based System,” International
Journal of Precision Engineering and Manufacturing, August 2012, V(13), Issue
8, pp 1453-1459. http://link.springer.com/article/10.1007%2Fs12541-012-0191-3
20- N. Masmiati, Ahmed
A. D. Sarhan, M. Hamdi "Optimizing the Cutting Parameters for Better
Surface Quality in 2.5D Cutting Utilizing Titanium Coated Carbide Ball End
Mill" International Journal of Precision Engineering and Manufacturing, December
2012, V(13), No. 12, pp. 2097-2102.
http://link.springer.com/article/10.1007%2Fs12541-012-0277-y
21- A.A. Hamdan, Ahmed
A.D. Sarhan, M. Hamdi, “An Optimization Method of the Machining
Parameters in High Speed Machining of Stainless Steel Using Coated Carbide
Tool for Best Surface Finish”, The International Journal of Advanced
Manufacturing Technology, January 2012, V(58), Issue 1-4, pp 81-91.
http://www.springerlink.com/content/0208j341m335t3t0/
22- M. Sayuti1, Ahmed
A. D. Sarhan, M. Fadzil, M. Hamdi, "Enhancement and verification of
a machined surface quality for glass milling operation-using CBN grinding
tool- Taguchi approach" International Journal of Advanced Manufacturing
Technology, June 2012, V(60), Issue 9-12, pp 939-950.
http://www.springerlink.com/content/37t53v1435471362/
23- M. Sayuti1, Ahmed
A. D. Sarhan, M. Hamdi, "Experimental Study on Minimizing Edge
Chipping in Glass Milling Operation using an Internal CBN Grinding Tool,
International Journal of Materials and Manufacturing Processes, 2011, V(26),
Issue 8, PP: 969-976.
http://www.tandfonline.com/doi/abs/10.1080/10426914.2010.530533 24- Ahmed A. D. Sarhan, Atsushi Matsubara,
“Compensation Method of the Machine Tool Spindle Thermal Displacement for
Accurate Monitoring of Cutting Forces,” International Journal of Materials
and Manufacturing Processes, 2011, V(26), Issue 12, pp: 1511-1521.
http://www.tandfonline.com/doi/abs/10.1080/10426914.2010.544825
25- Ahmed A.D. Sarhan, R. Sayed, A. A.
Nasr, and R. M. El-Zahry, "Interrelation Between Cutting Force Variation
and Tool Wear in End-Milling", Journal of Materials Processing
Technology, ( 2001), V(109), No.3, pp 229-235.
http://www.sciencedirect.com/science/article/pii/S0924013600008037
26- E. Zalnezhad, Ahmed
A. D. Sarhan, M. Hamdi, “Surface Hardness Prediction of CrN Thin Film
Coating on AL7075-T6 Alloy Using Fuzzy Logic System”, International Journal
of Precision Engineering and Manufacturing, March 2013, V(14), Issue 3, pp
467-473.
http://www.springerlink.com/openurl.asp?genre=article&id=doi:10.1007/s12541-013-0063-5 27-
S. Baradarana, W. J. Basirunb, E. Zalnezhad, M. Hamdi, Ahmed
A.D. Sarhan, Y. Alias “Fabrication and deformation behaviour of
multilayer Al2O3/Ti/TiO2 nanotube arrays,” Journal of the Mechanical Behavior
of Biomedical Materials, April 2013, V(20), Pages 272–282. http://dx.doi.org/10.1016/j.jmbbm.2013.01.020 28-
M. Emami, M. H. Sadeghi, Ahmed A. D. Sarhan,
“Investigating the Effects of Liquid Atomization and Delivery Parameters of
Minimum Quantity Lubrication on the Grinding Process of Al2O3 Engineering
Ceramics”, Journal of Manufacturing Processes, (2013), V(15), Issue 3, pp: 374–388.
http://dx.doi.org/10.1016/j.jmapro.2013.02.004 29- Ahmed A. D. Sarhan, Atsushi Matsubara,
Motoyuki Sugihara,Hidenori
Saraie, Soichi Ibaraki, Yoshiaki Kakino, "Monitoring Method of Cutting
Force by Using Additional Spindle Sensors", JSME International Journal,
Series C, (2006), Vol.49, No.2, pp.307-315.
https://www.jstage.jst.go.jp/article/jsmec/49/2/49_2_307/_article 30- M.Sayuti, Ahmed A.
D. Sarhan, M. Hamdi, "Optimizing the Machining Parameters in Glass
Grinding Operation on the CNC Milling Machine for Best Surface
Roughness" Journal of Advanced Materials Research (2010), V(154-155),
pp 721-726.
http://www.scientific.net/AMR.154-155.721 31-
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi,
“Fretting Fatigue Life Evaluation of Multilayer Cr-CrN Coated Al7075-T6 with
Higher Adhesion Strength-Fuzzy Logic Approach”, International Journal of
Advanced Manufacturing Technology, November 2013, Volume 69, Issue 5-8, pp
1153-1164.
http://dx.doi.org/10.1007/s00170-013-5093-8 32-
Mansour S.Farhan, Erfan. Zalnezhad, Abdul. Razak.
Bushroa, Ahmed Aly Diaa Sarhan, “Electrical and Optical Properties of
Indium-tin Oxide (ITO) Films Prepared by Ion-Assisted Deposition (IAD) at
Room Temperature” International Journal of Precision Engineering and
Manufacturing, August 2013,V(14), No. 8, pp. 1465-1469.
http://link.springer.com/article/10.1007%2Fs12541-013-0197-5 33-
M. Sayuti, Ahmed A. D. Sarhan, S. Salem,
“Development of SiO2 Nanolubrication System for better surface Quality, More
Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140”
Advanced Materials Research, 2013, V(748), pp 56-60. http://www.scientific.net/AMR.748.56
34-
Nik Masmiati Nik Pa, Ahmed A.D. Sarhan, Mohd Hamdi
Abd Shukor, “Investigate the Lubrication Effects on Cutting Force and Power
Consumption in Up and Down End Milling”, Advanced Materials Research, 2013,
V(748), pp 264-268.
http://www.scientific.net/AMR.748.264 35-
E. Zalnezhad, S. Baradaran, A. R. Bushroa, Ahmed A. D.
Sarhan, “Mechanical Property Enhancement of Ti-6Al-4V by Multilayer Thin
Solid Film Ti/TiO2 Nanotubular Array Coating for Biomedical Application”,
Metallurgical and Materials Transactions A, February 2014, Volume 45, Issue 2,
pp 785-797.
http://dx.doi.org/10.1007/s11661-013-2043-x 36-
H. Adibi, S.M. Rezaei, Ahmed A. D. Sarhan, “A New
Method for Determination of Grinding Wheel Loading Using Digital Image
Processing," ASME, J. Manuf. Sci. Eng. 136(1), 011012 (Dec 02, 2013)
Paper No: MANU-12-1175; Doi: 10.1115/1.4025782
http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=1761413
37- Mahdi Sparham, Ahmed
A. D. Sarhan, N. A. Mardi, M. Hamdi, "Design and Manufacturing of an
Automated Lubrication Control System in CNC Machine Tool Guideways for More
Precise Machining and Less Oil Consumption", Int J Adv Manuf Technol
(2014) 70:1081–1090. http://dx.doi.org/10.1007/s00170-013-5325-y 38-
Bizhan Rahmati, Ahmed A. D. Sarhan, M.Sayuti,
“Investigating the optimum molybdenum disulfide (MoS2) nanolubrication
parameters in CNC milling of AL6061-T6 alloy” International Journal of
Advanced Manufacturing Technology, February 2014, Volume 70, Issue 5-8,
pp 1143-1155.
http://dx.doi.org/10.1007/s00170-013-5334-x 39-
Ahmed A. D. Sarhan, “Investigate the
spindle errors motions from thermal change for high precision CNC machining
capability”, International Journal of Advanced Manufacturing Technology,
February 2014, Volume 70, Issue 5-8, pp 957-963.
http://dx.doi.org/10.1007/s00170-013-5339-5 40-
S. Y. Sia, Ahmed A. D. Sarhan, “Morphology
investigation of worn bearing surfaces using SiO2 nanolubrication system”,
Int J Adv Manuf. Technol. (2014) 70: pp: 1063–1071.
http://dx.doi.org/10.1007/s00170-013-5340-z 41-
Bizhan Rahmati, Ahmed A. D. Sarhan, M.Sayuti,
“Morphology of Surface Generated by End Milling AL6061-T6 using Molybdenum
disulfide (MoS2) Nanolubrication in End Milling Machining” Journal of Cleaner
Production, 66 (2014) 685-691.
http://www.sciencedirect.com/science/article/pii/S0959652613007403 42-
E. Zalnezhad, Ahmed A. D. Sarhan, P. Jahanshahi,
“A New Fretting Fatigue Testing Machine Design, Utilizing Rotating-Bending
Principle Approach” International Journal of Advanced Manufacturing
Technology, February 2014, Volume 70, Issue 9-12, pp 2211-2219. http://dx.doi.org/10.1007/s00170-013-5457-0 43-
H. Adibi, S. M. Rezaei, Ahmed A. D. Sarhan,
“Investigation on using high-pressure fluid jet in grinding process for less
wheel loaded areas” International Journal of Advanced Manufacturing
Technology, Volume 70, Issue 9 (2014), Page 2233-2240.
http://dx.doi.org/10.1007/s00170-013-5471-2 44-
M. Emami, M. H. Sadeghi, Ahmed A. D. Sarhan,
Farshid Hasani “Investigating the Minimum Quantity Lubrication in Grinding of
Al2O3 Engineering Ceramic”, Journal of Cleaner Production, Volume 66, 1 March
2014, Pages 632–643.
http://www.sciencedirect.com/science/article/pii/S0959652613007828 45-
M. Sayuti, M. E. Ooi , Ahmed A. D. Sarhan, M.
Hamdi “Investigation on the Morphology of the Machined Surface in End Milling
of Aerospace AL6061-T6 for Novel uses of SiO2 Nanolubrication System”,
Journal of Cleaner Production, Volume 66, 1 March 2014, Pages 655–663. http://www.sciencedirect.com/science/article/pii/S0959652613008299 46-
E. Zalnezhad, Ahmed A. D. Sarhan, “A Fuzzy Logic
Predictive Model for Measured Surface Roughness of Ti-TiN Coating on
AL7075-T6 Alloy for Longer Fretting Fatigue Life” Measurement, Volume 49,
March 2014, Pages 256–265.
http://www.sciencedirect.com/science/article/pii/S0263224113005952
47-
H. Ghafarirad, Seyed Mehdi Rezaei, Mohammad
Zareinejad, Ahmed A. D. Sarhan, “Disturbance Rejection Based
Robust Control for Micro Positioning of Piezoelectric Actuators” Comptes
Rendus Mecanique, Volume 342, Issue 1, January 2014, Pages 32–45. http://dx.doi.org/10.1016/j.crme.2013.11.003 48-
Ahmed A. D. Sarhan, N.S.M EL-TAYEB, “Investigate the Surface
Quality of the Burnished Brass C3605-Fuzzy Rule Based Approach”,
International Journal of Advanced Manufacturing Technology, Volume 71, Issue
5 (2014), Page 1143-1150.
http://dx.doi.org/10.1007/s00170-013-5543-3 49-
S. Y. Sia, Eman Z. Bassyony, Ahmed A. D. Sarhan,
“Development of SiO2 Nanolubrication System to be Used In Sliding
Bearings” International Journal of Advanced Manufacturing Technology, Volume
71, Issue 5 (2014), Page 1277-1284.
http://dx.doi.org/10.1007/s00170-013-5566-9
50-
M. Sayuti, Ahmed A. D. Sarhan, F. Salem, “Novel
Uses of SiO2 Nano-lubrication System in Hard Turning Process of Hardened
Steel AISI4140 for Less Tool Wear, Surface Roughness and Oil Consumption”
Journal of Cleaner Production, Volume 67, 15 March 2014, Pages 265–276. http://www.sciencedirect.com/science/article/pii/S0959652613009062 51-
H. Ghafarirad, S.M. Rezaei, Ahmed A. D. Sarhan, M.
Zareinejad, “Continuous dynamic modeling of bimorph piezoelectric
cantilevered actuators considering hysteresis effect and dynamic behavior
analysis” Mathematical and Computer Modeling of Dynamical Systems, Volume 21,
Issue 2, 2015, pp. 130-152
http://dx.doi.org/10.1080/13873954.2014.906472 52-
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi,
“Multi-Layer Thin Film CrN Coating on Aerospace AL7075-T6 Alloy for Harder
and More Wear Resistance of Substrate Surface” International Journal of
Advanced Manufacturing Technology (2014), June 2014, Volume 72, Issue 9-12,
pp 1491-1502.
http://link.springer.com/article/10.1007/s00170-014-5757-z 53-
E. Mohseni, E. Zalnezhad, Ahmed A. D. Sarhan, A.
R. Bushroa, “A Study on Surface Modification of Al7075-T6 Alloy against
Fretting Fatigue Phenomenon- Review Paper”, Advances in Materials Science and
Engineering, Volume 2014 (2014), Article ID 474723, 17 pages. http://www.hindawi.com/journals/amse/aip/474723/ 54-
H. Ghafarirad, S.M. Rezaei, Ahmed A.D. Sarhan, N.
A. Mardi, “Modified Robust External
Force Control with Disturbance Rejection with Application to Piezoelectric
Actuators” Transactions of the Institute of Measurement and Control, January
2015 vol. 37 no. 1, pp.131-143. http://tim.sagepub.com/content/37/1/131
55-
Ibrahem Maher, M.E.H. Eltaib, Ahmed A.D. Sarhan,
R.M.El-ZAHRY,, “Investigate the effect of the machining parameters on the
surface quality of machined Brass (60/40) in CNC End-Milling-Automotive
application”, International Journal of Advanced Manufacturing Technology,
September 2014, Volume 74, Issue 1-4, pp 531-537.
http://dx.doi.org/10.1007/s00170-014-6016-z 56-
M. Akhtari Zavareh, Ahmed A. D. Sarhan, A.R
Bushroa, Wan Jeffrey Basirun “Plasma thermal spray of ceramic oxide coating
layer to enhance wear and corrosion resistance of carbon steel for oil and
gas application” Ceramics international, Volume 40, Issue 9, Part A, November
2014, Pages 14267–14277.
http://www.sciencedirect.com/science/article/pii/S027288421400889X# 57-
H. Amini, S.M. Rezaei, M. Zareinejad, H. Ghafarirad, Ahmed
A. D. Sarhan, "Robust Control Based Linear Bilateral Teleoperation
System without Force Sensor”, J Braz. Soc. Mech. Sci. Eng. (2015) 37:579–587.
http://link.springer.com/article/10.1007/s40430-014-0207-2 58-
M.A. Ezazi, M.M. Quazi, E. Zalnezhad, Ahmed A. D.
Sarhan, “Enhancing the tribo-mechanical properties of aerospace AL7075-T6
by magnetron-sputtered Ti/TiN, Cr/CrN & TiCr/TiCrN thin film ceramic
coatings”, Ceramics international, Volume 40, Issue 10, Part A, December
2014, Pages 15603–15615.
http://www.sciencedirect.com/science/article/pii/S0272884214011018 59-
Saeid Baradaran,
Erfan Zalnezhad, W. J. Basirun, Mehran Sookhakian, Ahmed A. D.
Sarhan, Y. Alias, “Statistical optimization and fretting fatigue
study of Zr/ZrO2 nanotubular arrays coating on Ti-6Al-4V”, Surface and
Coatings Technology, (2014), Volume 258, 15 November 2014, Pages 979–990.
http://www.sciencedirect.com/science/article/pii/S0257897214006458
60-
Ibrahem Maher, Ahmed A.D. Sarhana, M. Hamdi,
“Review on improvement of wire electrodes properties for higher working time
and utilization in Wire EDM machining” International Journal of Advanced
Manufacturing Technology (2014), Volume 76, Issue 1 (2015), Page 329-351.
http://dx.doi.org/10.1007/s00170-014-6243-3 61-
Nik Masmiati, Ahmed A. D. Sarhan, M. Hamdi "Investigating
the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using
Titanium Coated Carbide Ball End Mill," Advances in Materials Science
and Engineering, vol. 2014, Article ID 485267, 13 pages, 2014. Doi:10.1155/2014/485267.
http://www.hindawi.com/journals/amse/aip/485267/ 62-
Salman Al-Saeedi, Ahmed A.D. Sarhan, A.R Bushroa,
“Investigate of the Surface Tribology of Roller Burnished Polymer – Fuzzy
Rule Based Approach” Tribology Transactions Volume 58, Issue 2, pp. 240-246,
2015.
http://dx.doi.org/10.1080/10402004.2014.962205
63- Ibrahem Maher, M.E.H.
Eltaib, Ahmed A.D. Sarhan, R.M.El-ZAHRY, “Cutting force based adaptive
neuro-fuzzy approach for accurate surface roughness prediction in end milling
operation for intelligent machining”, International Journal of Advanced
Manufacturing Technology, February 2015, Volume 76, Issue 5-8, pp 1459-1467.
http://dx.doi.org/10.1007/s00170-014-6379-1 64- H.Amini, S.M. Rezaei,
Ahmed A. D. Sarhan, J.Akbari, N. D. Mardi “Transparency Improvement by
External Force Estimation in Time Delayed Nonlinear Bilateral Teleoperation
System”, ASME, Journal of Dynamic Systems, Measurement and Control, 137(5),
051013 (May 01, 2015) (15 pages).
http://dynamicsystems.asmedigitalcollection.asme.org/article.aspx?articleid=1936140
65-
N. Masmiati, Ahmed A. D. Sarhan, "Optimizing
Cutting Parameters in Inclined End Milling for Minimum Surface Residual
Stress - Taguchi Approach” Measurement, Volume 60, January 2015, Pages 267–275.
http://www.sciencedirect.com/science/article/pii/S0263224114004667 66-
M. M. Barzani, E. Zalnezhad, S. Farahany, Ahmed A.D.
Sarhan, S. Ramesh, H. M. Khanlou, “Fuzzy Logic Based Model for Predicting
Surface Roughness of Machined Al-Si-Cu Cast Alloy Using Different Additives-Turning”
Measurement, Volume 61, February 2015, Pages 150–161.
http://www.sciencedirect.com/science/article/pii/S0263224114004679 67-
Mehdi Hourmand, Saeed Farahany, Ahmed A. D. Sarhan,
Noording Mohd Yusof, “Investigating the Electrical Discharge Machining (EDM)
Parameter Effects on Al-Mg2Si Metal Matrix Composite (MMC) for High Material
Removal Rate (MRR) and Less TWR - RSM Approach”, Int. J Adv Manuf. Technol.
(2015) 77: 831–838.
http://dx.doi.org/10.1007/s00170-014-6491-2 68-
Mohsen Marani Barzani, Ahmed A.D. Sarhan, Saaed
Farahany, Ramesh Singh, Ibrahim Maher, “Machinability of Al-Si-Cu cast alloy
containing bismuth and antimony when dry turning using coated carbide insert”
Measurement, Volume 62, February 2015, Pages 170–178.
http://dx.doi.org/10.1016/j.measurement.2014.10.030 69- Zuriani Usop, Ahmed A. D. Sarhan, N. A. Mardi, Md
NizamAbd Wahab, “Measuring of positioning, circularity and static errors of a
CNC Vertical Machining Centre for validating the machining accuracy”
Measurement, Volume 61, February 2015, Pages 39–50.
http://www.sciencedirect.com/science/article/pii/S0263224114004941# 70-
M. E. Ooi, M. Sayuti, Ahmed. A. D. Sarhan, " Fuzzy-logic-based approach to
investigate the novel uses of nano suspended lubrication in precise machining
of Aerospace AL tempered grade 6061” Journal of Cleaner Production, Volume
89, 15 February 2015, Pages 286–295.
http://www.sciencedirect.com/science/article/pii/S0959652614011767 71-
Seyed Reza Besharati, Vahid Dabbagh, Hamid Amini, Ahmed
A.D. Sarhan, Javad Akbari, Mohd Hamdi Abd Shukor, “Nonlinear dynamic
analysis of a new anti-backlash gear mechanism design for reducing dynamic
transmission error,” ASME, J. Mech. Des. 137(5), 054502 (May 01, 2015).
http://mechanicaldesign.asmedigitalcollection.asme.org/article.aspx?articleid=2091648 72-
Ahmed A. D. Sarhan, A. Matsubara
“Investigate the Characterization of Machine Tool Spindle Stiffness for
Intelligent CNC Machining”, Robotics and Computer-Integrated Manufacturing, 34(2015)133–139.
http://dx.doi.org/10.1016/j.rcim.2014.12.001 73-
M. Akhtari Zavareh, Ahmed
A. D. Sarhan, A.R Bushroa, Wan Jeffrey Basirun, “The Tribological and
Electrochemical behavior of HVOF-sprayed Cr3C2–NiCr coating on carbon steel”
Ceramic international, 41 (2015) 5387–5396. http://dx.doi.org/10.1016/j.ceramint.2014.12.102 74-
Saman Paria, Mohammad Shahab Goodarzi, Ahmed A. D.
Sarhan, S. Baradaran, Kazi Salimnewaz, H.S.C. Metselaar, Hooman Yarmand,
M.A. Alavi, and Behnam Rahmanian, "Indoor solar thermal energy saving
time with phase change material in a horizontal shell and finned-tube heat
exchanger", Hindawi Publishing Corporation, The Scientific World Journal,
The Scientific World Journal, Volume 2015, Article ID 291657, 7 pages, http://dx.doi.org/10.1155/2015/291657
http://www.hindawi.com/journals/tswj/aip/291657/ 75-
Mum Wai Yip, Stuart Barnes, Ahmed A.D. Sarhan,
“Deposition of a Silicon Carbide Reinforced Metal Matrix Composite (P25)
Layer using CO2 Laser” ASME, J. Manuf. Sci. Eng. 137(3), 031010
(Jun 01, 2015) (8 pages), doi:10.1115/1.4029831. http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2130671 76-
V. Baghlani, P. Mehbudi, J. Akbari, E. Zalnezhad, Ahmed
A. D. Sarhan, "An Optimization technique on Ultrasonic and Cutting
Parameters for Drilling and Deep Drilling of nickel-based high-strength
Inconel 738LC Superalloy with deeper and higher holes quality", Int J
Adv Manuf Technol (2016) 82:877–888
http://dx.doi.org/10.1007/s00170-015-7414-6 77- Ibrahem Maher, Ahmed
A.D. Sarhan, M. Hamdi, “Increasing the productivity of the wire-cut
electrical discharge machine associated with sustainable production” Journal
of Cleaner Production 108 (2015) 247-255.
http://www.sciencedirect.com/science/article/pii/S0959652615007763 78- Seyed Reza besharati,
Vahid Dabbagh, Ahmed A. D. Sarhan,
Jvad akbari, Mohd Hamdi, Zhi Chao Ong, “Multi-objective design and
structural optimization of the gantry in a gantry machine tool aimed at
improving static, dynamic, light-weight and low-cost performance,” Concurrent
Engineering: Research and Applications, 2016, Vol. 24(1) 83–93
http://cer.sagepub.com/content/24/1/83 79- B. Rahmati, Ahmed
A.D. Sarhan, E. Zalnezhad, Z. Kamiab, B. Nasiri, W. A. B. W. ABAS,
"Enhancement of adhesion strength of Tantalum Oxide ceramic thin film
coating onto biomedical Ti-6Al-4V alloy by thermal surface treatment", Ceramics
International, 41 (2015) 13055 – 13063.
http://dx.doi.org/10.1016/j.ceramint.2015.07.090 80- S. Baradaran, Bahman
Nasiri-Tabrizi, T.S. Velayutham, Ahmed A.D. Sarhan, "Thermally
induced crystallization of mechanically alloyed Na0.5Bi0.5TiO3 and
K0.5Bi0.5TiO3 piezoelectric ceramic nanopowders", Ceramics International,
41 (2015) 14157–14164.
http://dx.doi.org/10.1016/j.ceramint.2015.07.038 81- M.A. Ezazi, Farazila
Yosof. Ahmed A. D. Sarhan, "The employment of advanced Fiber
Laser technology to weld dissimilar materials: Austenitic stainless steel 304
L with Aluminum alloy 5083 using pre-placed activating flux", Materials
and Design, 87 (2015) 105–123.
http://www.sciencedirect.com/science/article/pii/S0264127515302641 82- B. Rahmati, Ahmed
A. D. Sarhan, E. Zalnezhad, Z. Kamiab, A. Dabbagh, D. Choudhury, W. A. B.
W. Abas, " Development of Tantalum Oxide (Ta-O) thin film coating on
biomedical Ti-6Al-4V alloy for better mechanical properties and
biocompatibility enhancement" Ceramics International, 42 (2016) 466–480
http://www.sciencedirect.com/science/article/pii/S0272884215016594 83- S. Paria, S.
Baradaran, Ahmed. A.D. Sarhan, S.N. Kazi, "Performance evaluation
of latent heat energy storage in horizontal shell-and-finned tube for solar
application", J Therm Anal Calorim (2016) 123:1371–1381
http://link.springer.com/article/10.1007/s10973-015-5006-1 84- N. Masmiati, Ahmed
A. D. Sarhan, M. A. Hassan, M. Hamdi, ”Novel Uses of SiO2 Nanolubrication
in End-Milling of Medium Carbon Steel for Higher Compressive Residual Stress
Measured by High Energy X-ray Diffraction Data” Proc IMechE Part J: J. Engineering Tribology, June 2016 vol. 230
no. 6, pp.697-708.
http://pij.sagepub.com/content/230/6/697 85- G. Manadis, S. M.
Rezaei, M. T. A. Zareinejad, Ahmed A. D. Sarhan, "A novel
rate-dependent hysteresis modeling and position control technique for
piezo-actuated bimorph beams", Journal of Intelligent Material Systems
and Structures, August 2016 vol. 27 no. 13 1802-1813.
http://jim.sagepub.com/content/27/13/1802 86- Houriyeh Marashi, Ahmed
A. D. Sarhan, M. Hamdi, "Employing Ti Nano-powder Dielectric to
Enhance Surface Characteristics in Electrical Discharge Machining of AISI D2
steel" Applied Surface Science, 357 (2015) 892–907
http://www.sciencedirect.com/science/article/pii/S0169433215021996 87- Mitra Akhtari
Zavareh, Ahmed A. D. Sarhan, Wan Jeffrey Basirun,
"Electrochemical Corrosion Behavior of Carbon Steel Pipes Coated With a
Protective Ceramic Layer Using Plasma and HVOF Thermal Spray Techniques for
Oil and Gas", Ceramics International, 42 (2016) 3397–3406.
http://www.sciencedirect.com/science/article/pii/S0272884215020404 88- M.A Zavareh, Ahmed
A D Sarhan, P.A Zavareh, W, J. Basirun, "Development and protection
evaluation of two new advanced ceramic composites thermal spray coatings
Al2O3-40TiO2 and Cr3C2-20NiCr on carbon steel petroleum oil piping", Ceramics
International 42 (2016) 5203–5210
http://dx.doi.org/10.1016/j.ceramint.2015.12.044 89- E. Zalnezhad, E.
Maleki, S.M. Banihashemian, Ahmed A D Sarhan, S. Ramesh, "Wettability,
structural and optical properties investigation of TiO2 nanotubular arrays"
Materials Research Bulletin, Volume 78, June 2016, Pages 179–185
http://www.sciencedirect.com/science/article/pii/S0025540816300356 90- Mahdi Sparham, Ahmed
A. D. Sarhan, Mahidzal Dahari, Noor A Mardi, Mohd Hamdi, "Cutting
force analysis to estimate the friction force in linear guideways of CNC
machine", Measurement 85 (2016) 65–79.
http://www.sciencedirect.com/science/article/pii/S0263224116000944 91- Nik Masmiati, Ahmed
A.D. Sarhan, Mohsen Abdel Naeim Hassan, Mohd Hamdi, “Optimization of
Cutting Conditions for Minimum Residual Stress, Cutting Force and Surface
Roughness in End Milling of S50C Medium Carbon Steel”, Measurement 86 (2016)
253–265.
http://www.sciencedirect.com/science/article/pii/S0263224116001263 92- B. Rahmati, Ahmed
A. D. Sarhan, W. A. B. W. Abas, " Ceramic tantalum oxide thin film
coating to enhance the corrosion and wear characteristics of Ti-6Al-4V alloy”,
Journal of Alloys and Compounds 676 (2016) 369-376.
http://www.sciencedirect.com/science/article/pii/S0925838816307721 93- Ibrahem Maher, Ahmed
A. D. Sarhan, Houriyeh Marashi, Mohsen Marani Barzani, M. Hamdi,
"White layer thickness prediction in WEDM using neuro-fuzzy
modeling" Transactions of the IMF, 2016, 94:4, 204-210
http://dx.doi.org/10.1080/00202967.2016.1180847 94- A. Hozoorbakhsh, M.
I.S. Ismail, N.B. Abdul Aziz, Ahmed A.D. Sarhan, A. Bahadoran,
"An Investigation of Heat Transfer and Fluid Flow on Laser Micro-Welding
upon the Thin Stainless Steel Sheet (SUS304) using Computational Fluid
Dynamics (CFD)," International Communications in Heat and Mass Transfer
75 (2016) 328–340.
http://dx.doi.org/10.1016/j.icheatmasstransfer.2016.05.008
95- Houriyeh Marashi,
Davoud M Jafarlou, Ahmed A. D. Sarhan, Mohd Hamdi, "State of the
art in powder mixed dielectric for EDM applications", Precision
Engineering, Volume 46, October 2016, Pages 11–33.
http://www.sciencedirect.com/science/article/pii/S0141635916300691
96- Houriyeh Marashi, D.
M Jafarlou, Ahmed A. D. Sarhan, N. A. Mardi, "Employing severe
plastic deformation to process electrical discharge machining
electrodes", Precision engineering, Volume 46, October 2016, Pages
309–322
http://www.sciencedirect.com/science/article/pii/S014163591630071X 97- H. Amini, Behfar
Farzaneh, Ahmed A. D. Sarhan, Noor Azizi, ”Sensor-less
Force-Reflecting Macro-Micro Telemanipulation systems by Piezoelectric
actuators”, ISA Transactions, Volume 64, September 2016, Pages 293–302. http://www.sciencedirect.com/science/article/pii/S0019057816300982 98- Ibrahem Maher, Ahmed
A.D. Sarhan, "Proposing a new performance index to identify the
effect of spark energy and pulse frequency simultaneously to achieve high
machining performance in WEDM," Int J Adv Manuf Technol, 2016, DOI
10.1007/s00170-016-9680-3
http://dx.doi.org/10.1007/s00170-016-9680-3 99- Mehdi Hourmand, Ahmed
A. D. Sarhan, Noordin Mohd Yusof, "Development of new fabrication and
measurement techniques of micro-electrodes with high aspect ratio for micro
EDM using typical EDM machine", Measurement 97 (2017) 64–78.
http://www.sciencedirect.com/science/article/pii/S026322411630656X 100-
M. Hourmand, Ahmed A. D. Sarhan, M. D. Sayuti,
“Micro-electrode fabrication processes for micro-EDM drilling and milling: A
state of the art review”, Int J Adv Manuf Technol, 2016, DOI:
10.1007/s00170-016-9671-4.
http://dx.doi.org/10.1007/s00170-016-9671-4 101-
Vahid Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N.
A. Mardi "Design and experimental evaluation of precise compact tubular
ultrasonic motor driven with single phase source”, Precision Engineering 48
(2017) 172–180.
http://www.sciencedirect.com/science/article/pii/S0141635916303944 102-
F. Azimifar, M. Abrishamkar, B. Farzaneh, Ahmed A. D.
Sarhan, H. Amini, “Improving Teleoperation System Performance in the
Presence of Estimated External Force”,
Robotics and Computer–Integrated Manufacturing 46 (2017) 86–93.
http://www.sciencedirect.com/science/article/pii/S0736584516301879
103-
D. Abidou, N. Yusoff, N. Nazri, M. A. Awang, M. A.
Hassan, Ahmed A.D. Sarhan, “Numerical Simulation of Metal Removal in
Laser Drilling using Symmetric Smoothed Particle Hydrodynamics” Precision
Engineering. 2017, DOI: 10.1016/j.precisioneng.2017.01.012.
http://www.sciencedirect.com/science/article/pii/S014163591730034X
104-
D. Abidou, N. Yusoff, N. Nazri, M. A. O. Awang, M. A
Hassan, Ahmed A.D. Sarhan “Numerical Simulation of Metal Removal in
Laser Drilling Using Radial Point Interpolation Method”, Engineering Analysis
with Boundary Elements, 77 (2017) 89–96.
http://www.sciencedirect.com/science/article/pii/S0955799717300401 105-
Yusuf S. Dambatta, Ahmed A. D. Sarhan, M Sayuti,
M. Hamdi “Ultrasonic Assisted Grinding of Advanced Materials for Biomedical
and Aerospace Applications-A Review” Int J Adv Manuf Technol, 2017, DOI: 10.1007/s00170-017-0316-z
http://dx.doi.org/10.1007/s00170-017-0316-z 106-
U. Sutharsini, M. Thanihaichelvan, C.H. Ting, S. Ramesh,
C.Y. Tan, Hari Chandran, Ahmed A.D. Sarhan, S. Ramesh, I. Urriés
“Effect of two-step sintering on the hydrothermal ageing resistance of
tetragonal zirconia polycrystals”, Ceramics International 43 (2017) 7594–7599
http://doi.org/10.1016/j.ceramint.2017.03.052
107-
M. Z. Ibrahim, Ahmed
A.D. Sarhan, F. Yusuf, M. Hamdi, “Biomedical materials and techniques to
improve the tribological, mechanical and biomedical properties of orthopedic
implants - A review article”, Journal of Alloys and Compounds 714 (2017) 636-667.
http://dx.doi.org/10.1016/j.jallcom.2017.04.231 108-
M. Sparham, Ahmed
A.D. Sarhan, M. Hamdi, N. Mardi, M. Dahari, “ANFIS modeling to predict
the friction forces in CNC guideways and servomotor currents in the feed
drive system to be employed in lubrication control system”, Journal of
Manufacturing Processes 28 (2017) 168–185.
http://dx.doi.org/10.1016/j.jmapro.2017.05.020 109-
V. Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A.
Mardi, “Design and manufacturing of Ultrasonic motor with in-plane and
out-of-plane bending vibration modes of rectangular plate with large contact
area”, Measurement 109 (2017) 425–431.
http://dx.doi.org/10.1016/j.measurement.2017.06.007 110-
A. H. Jalaludin, M. Hamdi, N. A. Mardi, Ahmed A. D.
Sarhan, Md. Sayuti, S. R. Besharati, W. N. Izzati, Y. S. Dambatta,
“Development and evaluation of the machining performance of a CNC gantry
double motion machine tool in different modes”, Int J Adv Manuf Technol,
2017, DOI: 10.1007/s00170-017-0332-z.
https://link.springer.com/article/10.1007/s00170-017-0332-z 111-
D. Abidou, Ahmed A.D. Sarhan, N. Yusoffa, N.
Nazria, M.A. Omar Awangc, M. A. Hassane, “Numerical Simulation of Metal
Removal in Laser Drilling using Meshless Local Petrov-Galerkin Collocation
Method” Applied Mathematical Modelling, 2017, DOI:10.1016/j.apm.2017.08.032.
https://doi.org/10.1016/j.apm.2017.08.032
112-
Vahid Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N.
A. Mardi, "Electromechanical modeling and high speed design of a tubular
ultrasonic motor", The international journal of acoustics and vibration,
Accepted
|