
Contact Information
Office: Bldg 63-Room 143
Phone: +966- 3 -860- 7819
Fax: +966-3-860 -2949 (ME Dept)
Education
Bachelor of Engineering ( Mechanical Engineering), Osmania University College of Engineering, Hyderabad, India
Master of Science ( Materials and Manufacturing Science), KFUPM, Dhahran, Saudi Arabia
Courses Taught
- ME407: Advance Manufacturing Lab
- ME323: Manufacturing Lab
- ME217: Materials Lab
- ME205 : Materials Science Lab
- ME003 : Preparatory Year Workshop
Research Areas
Processing, Testing and Characterization of Materials / Nanomaterials
*Powder Metallurgy Processing of Hard Metals and Ceramics
*Laser Assisted Treatment and Processing of Materials
*Fabrication, Characterization and Testing of Porous Materials / Membranes
Representative Publications
- BS Yilbas, IH Toor, J Malik,
F Patel, Laser gas assisted treatment of AISI H12 tool steel and corrosion properties, Optics and Lasers in Engineering, Vol 54, Pages 8-13, March 2014
(IF=1.916)
http://www.sciencedirect.com/science/article/pii/S0143816613003023 - BS Yilbas,
F Patel, C Karatas, Laser controlled melting of HSLA steel surface with presence of B4C particles, Applied Surface Science, Volume 282, 1, Pages 601–606, October 2013
(IF=2.112)
http://www.sciencedirect.com/science/article/pii/S0169433213011173 - T Laoui,
F Patel, N Saheb, N Aqeeli, Manufacture of microporous ceramic layer by suspension-sedimentation technique for filtration applications, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 227, No. 7, Pages 1032-1038, July 2013
(IF=0.77)
http://pib.sagepub.com/content/early/2013/03/07/0954405413476862.abstract - BS Yilbas, IH Toor, J Malik,
F Patel, C Karatas, Electrochemical Testing of Laser Treated Bronze Surface, Journal of Alloys and Compounds, Vol. 563, Pages 180-185, June 2013
(IF=2.39)
http://www.sciencedirect.com/science/article/pii/S0925838813004027 - BS Yilbas,
F Patel, C Karatas, Laser surface treatment of high‐speed tool steel (AISI M2), Surface and Interface Analysis, Volume 45, Issue 6, pages 1008-1013, June 2013
(IF=1.22)
http://onlinelibrary.wiley.com/doi/10.1002/sia.5202/full - BS Yilbas, IH Toor,
F Patel, MA Baig, Effects of Laser Re-melting on the Corrosion Properties of HVOF Coatings, Journal of Materials Engineering and Performance, Volume 22, Issue 5, Pages 1505-1511, May 2013
(IF=0.915)
http://link.springer.com/article/10.1007/s11665-012-0428-4#page-1 - SF Hassan, M Paramsothy,
F Patel, M Gupta, High temperature tensile response of nano-Al2O3 reinforced AZ31 nanocomposites, Materials Science and Engineering-A-Structural Materials, Volume 558, Pages 278–284, , December 2012
(IF=2.108)
http://www.sciencedirect.com/science/article/pii/S0921509312011070 - BS Yilbas, IH Toor, C Karatas,
F Patel, MMA Baig, Laser treatment of A286 superalloy: corrosion resistance of the treated surface, Surface and Interface Analysis Volume 44, Issue 10, Pages 1364–1369, October 2012
(IF=1.22)
http://onlinelibrary.wiley.com/doi/10.1002/sia.5041/full - Z Ahmad,
F Patel, Development of Novel Corrosion Techniques for a Green Environment, International Journal of Corrosion, Vol. 2012, Pages 8, July 2011
http://www.hindawi.com/journals/ijc/2012/982972/abs/ -
F Patel, MA Baig, T Laoui, Processing of porous alumina substrate for multilayered ceramic filter, Desalination and Water Treatment Volume 35, Issue 1-3, Pages 33-38, May 2011
(IF=0.852)
http://www.tandfonline.com/doi/abs/10.5004/dwt.2011.3505 - S Mekid, T Laoui,
F Patel, Exploring a Manufacturing Route to Produce WC-Based Micro-Cutting Tool With Nanostructured Material, ASME Proceedings, Paper No. IMECE2011-62334, Pages 171-176, 2011
http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1645602 - I Ahmed, Z Ahmad,
F Patel, MS Khan, A photo-cathodic protection system utilizing UV radiations, International Journal of Engineering and Technology Volume 11, Issue 1, Pages 154 - 159, February 2011
http://ijens.org/Vol%2011%20I%2001/118401-5353%20IJET-IJENS.pdf - Z Ahmad, I Ahmad,
F Patel, Fog Collection by Mimicking Nature, Journal of Biomimetics, Biomaterials, and Tissue Engineering Vol. 8, Pages 35-43, November 2010
http://www.scientific.net/JBBTE.8.35 - Z Ahmad,
F Patel, A lesson from nature, Materials World, Volume 17, Issue 10, Pages 33-34, October 2009
http://cat.inist.fr/?aModele=afficheN&cpsidt=21982781